Videos (page 3)
- Introducing the WMM30 series of 25 to 30W medical wall mount power supplies
The WMM30 series of medical wall mount power supplies are rated from 25 to 30W with output voltages from 5V to 24V. Certified to the medical safety…
- How is the interlock function enabled?
The Z+ programmable power supply has an interlock function that can be used to enable or disable the output voltage by an external switch or relay. Two…
- What are the key features of the CUS100ME series of 100W AC-DC power supplies?
The CUS100ME is a single output 2″ x 4″ AC-DC power supply with IEC 60601-1 3rd edition medical approval and IEC 62368-1 approval for ICT/AV applications. It is suitable…
- How can I set up the remote control interface?
The Z+ programmable power supplies have the ability to control the output voltage and output current levels remotely using an external analogue signal. The signal can be…
- Introducing the XMS500A range of 500W, configurable AC-DC power supplies
The XMS500A range of 500W, 1U, single-output power supplies is certified for both industrial (62368) and medical (60601) equipment with BF ready medical isolation. Available in either…
- How do I select auto start or safe start on the Z+ power supplies?
The Z+ programmable power supplies can be configured to either automatically resume operation when unit is turned on (auto start), or for the output to remain off…
- How do I perform a Z+ power supply factory reset?
Z+ programmable power supplies are frequently used for different tasks within an Engineering facility. One simple way of removing any prior settings and stored programs is to…
- Can I use Z+ and Genesys™ power supplies in the same communications chain?
Although the TDK-Lambda Z+ and Genesys™ have different form factors and product names, they accept the same commands and can be programmed using a common communication chain.…
- How do I lock the Z+ power supply front panel controls?
Locking the front panel controls on the Z+ programmable power supply avoids accidental changing of the set parameters. This can prevent damage to the load. Many of…
- Introducing the ZBM20 series of 12V, 15V and 24V 20A open frame buffer (hold-up) modules
The ZBM20 series of buffer modules provides 380ms additional hold-up or up to 448W peak power for loads connected to 12V, 15V and 24Vdc AC-DC power supplies.…
