Videos (page 4)
- How do I set up Z+ units for parallel operation?
For higher power requirements, up to six Z+ programmable power supplies can be set in parallel for a total of 4,800W. The host unit will be set…
- Introducing the CUS350MP range of 350/500W medical power supplies
The CUS350MP series of CUS350MP series of power supplies are certified to IEC60601-1 3rd edition (medical), IEC62368-1 and IEC62477-1 (OVCIII) with compliance to the EN60601-1-2:2015 Edition 4…
- What are the current fold-back options?
The desired characteristics of the overcurrent protection may differ between load types or the tests to be performed. For this reason, the Z+ programmable power supply series…
- How do I set up digital control parameters?
The Z+ programmable power supplies have a choice of several digital interfaces. These include RS232, RS485, USB and as an option, LAN. By pressing the front panel…
- Introducing the WMM30 series of 25 to 30W medical wall mount power supplies
The WMM30 series of medical wall mount power supplies are rated from 25 to 30W with output voltages from 5V to 24V. Certified to the medical safety…
- How is the interlock function enabled?
The Z+ programmable power supply has an interlock function that can be used to enable or disable the output voltage by an external switch or relay. Two…
- What are the key features of the CUS100ME series of 100W AC-DC power supplies?
The CUS100ME is a single output 2″ x 4″ AC-DC power supply with IEC 60601-1 3rd edition medical approval and IEC 62368-1 approval for ICT/AV applications. It is suitable…
- How can I set up the remote control interface?
The Z+ programmable power supplies have the ability to control the output voltage and output current levels remotely using an external analogue signal. The signal can be…
- Introducing the XMS500A range of 500W, configurable AC-DC power supplies
The XMS500A range of 500W, 1U, single-output power supplies is certified for both industrial (62368) and medical (60601) equipment with BF ready medical isolation. Available in either…
- How do I select auto start or safe start on the Z+ power supplies?
The Z+ programmable power supplies can be configured to either automatically resume operation when unit is turned on (auto start), or for the output to remain off…
