Products (page 10)
- How do I set up Z+ units for parallel operation?
For higher power requirements, up to six Z+ programmable power supplies can be set in parallel for a total of 4,800W. The host unit will be set…
- 300W and 1,000W programmable electronic DC loads offer multiple operating modes, high-speed response times and linear start-up from 0V
TDK Corporation (TSE 6762) announces the introduction of the TDK-Lambda brand SFL series of programmable electronic DC loads. The series comprises 300W and 1,000W power levels and…
- Introducing the CUS350MP range of 350/500W medical power supplies
The CUS350MP series of CUS350MP series of power supplies are certified to IEC60601-1 3rd edition (medical), IEC62368-1 and IEC62477-1 (OVCIII) with compliance to the EN60601-1-2:2015 Edition 4…
- Wind turbine inverter controller uses AC-DC and DC-DC power supplies
Wind turbines are now a common sight, generating clean, renewable power. The spinning blades operate a DC generator, which is then converted into AC power by an…
- Half-rack power supplies provide dual voltages for testing semiconductors
The manufacture of automobiles requires compliance with the Automotive Quality Management System Standard, IATF 16949. Like ISO 9001, it provides the standard for continual improvement, defect prevention,…
- What are the current fold-back options?
The desired characteristics of the overcurrent protection may differ between load types or the tests to be performed. For this reason, the Z+ programmable power supply series…
- Technical University uses programmable power supplies for research programme
Technical Universities often provide specialised courses in partnership with companies requiring advanced research. This also provides students, upon graduating, a deeper knowledge of a subject and benefits…
- How do I set up digital control parameters?
The Z+ programmable power supplies have a choice of several digital interfaces. These include RS232, RS485, USB and as an option, LAN. By pressing the front panel…
- Introducing the WMM30 series of 25 to 30W medical wall mount power supplies
The WMM30 series of medical wall mount power supplies are rated from 25 to 30W with output voltages from 5V to 24V. Certified to the medical safety…
- How is the interlock function enabled?
The Z+ programmable power supply has an interlock function that can be used to enable or disable the output voltage by an external switch or relay. Two…
