Introducing the CUS350MP range of 350/500W medical power supplies

Posted by David on September 10, 2021
Posted in: Products

The CUS350MP series of  CUS350MP series of power supplies are certified to IEC60601-1 3rd edition (medical), IEC62368-1 and IEC62477-1 (OVCIII) with compliance to the EN60601-1-2:2015 Edition 4 immunity requirements. The units also comply with EN 55011-B and EN 55032-B conducted and radiated emissions, meet the EN 61000-3-2 harmonics, IEC60601-1-2:2015 Ed 4 and IEC 61000-4 immunity standards.

The CUS350MP series is rated at 350W continuous and 1000W peak power output with convection cooling for low audible noise applications requiring occasional high peak power demands. With forced-air cooling, the units are rated at 500W continuous and 1000W peak power output. The high peak power rating makes them suitable for use in applications often served by larger, more expensive, non-peak capable power supplies, such as printers and other equipment using DC motors.

Typical application areas are varied and include:

  • robotics and factory automation
  • printing and ticketing equipment
  • hospital, clinical and healthcare equipment
  • Ultrasound
  • Dialysis
  • Bio-diagnostics
  • Laboratory equipment

The CUS350MP series accepts an 85 to 265Vac input and has a leakage current of less than 300µA. Four output voltages are available: 24, 30, 36 and 48V. A 5V (0.3A) standby voltage and remote on/off are fitted as standard.

For more information about the CUS350MP series, please visit: