News (page 3)
- Aerospace test system uses rugged MIL-spec DC-DC converters
Any aircraft, civilian or military, flying in shared airspace needs to meet civil aviation safety standards. Large amounts of data are often gathered, analysed and transmitted by…
- 300W Power Sink option added to the GENESYS+™ 1.7kW and 3.4kW programmable power supplies
The PSINK option on the GENESYS+™ series is used to reduce automated testing times, by enabling fast down-programming under no-load conditions. After a test is completed, the…
- 300W Power Sink option for programmable power supplies enables fast down-programming under no-load conditions
TDK Corporation (TSE 6762) announces the introduction of a Power Sink (PSINK) option to the 1.7kW and 3.4kW models of the TDK-Lambda GENESYS+™ series of high-power density…
- Programmable power supply series extended with 15kW and 22.5kW models in 2U and 3U high packages
TDK Corporation (TSE 6762) announces the introduction of 15kW and 22.5kW scalable power systems to the TDK-Lambda GENESYS+™ series of high-power density programmable DC power supplies. With…
- 1/16th brick footprint 400W to 750W DC-DC converters accept wide range inputs and provide wide output adjustment
TDK-Lambda’s i7A series of DC-DC buck (step-down, non-isolated) converters are designed for creating 33A, 45A and 60A outputs from a 12V, 24V, 36V or 48Vdc source. Wide…
- 1/16th brick footprint DC-DC buck converter series expanded with 60A models and adjustable current limit
TDK Corporation (TSE 6762) announces the expansion of the TDK-Lambda i7A series of non-isolated buck DC-DC converters with the industry-standard 1/16th brick pinout. The 60A output models…
- 1U high programmable DC power supply series includes 5kW 1000V and 1500V models for test and development of electric vehicles with batteries greater than 600V
TDK Corporation (TSE 6762) announces the introduction of two new models to the 5kW TDK-Lambda GENESYS+™ series of high-power density programmable DC power supplies. This expansion provides…
- Ruggedised 300W DC-DC buck-boost converters offer conduction cooling with wide range inputs and outputs
TDK-Lambda’s RGC series of DC-DC buck-boost (step-up/down, non-isolated) converters are specifically designed for harsh environments. The converters are encapsulated in an aluminium case providing resistance against shock…
- 10V 1000A programmable power supplies used for energising medical imaging magnets
MRI (Magnetic Resonance Imaging) scans provide an invaluable way of obtaining 3D images to diagnose medical conditions. These systems use superconducting magnets operating at around -270°C, usually…
- TDK-Lambda announces the introduction of very compact, 6W and 10W DC-DC converters
6W and 10W models have been added to the popular CCG series of DC-DC converters. These board mounted products further extend the popular CCG series of isolated…
