News (page 2)
- 400 to 750W ruggedised buck DC-DC converters offer conduction cooling with a wide range of inputs and outputs
TDK Corporation (TSE:6762) announces the introduction of the 400 to 750W rated RGB series of ruggedised non-isolated DC-DC converters from TDK-Lambda. Operating from input voltages of 9…
- 0-20V to 0-1500V programmable power supplies can be configured in 20U high 19” racking cabinets to deliver 90kW
TDK Corporation (TSE 6762) announces the introduction of 90kW rated GSPS 20U 19-inch racking cabinets to the TDK-Lambda GENESYS+™ series of programmable DC power supplies. The GSPS…
- 300W 1/16th brick pinout buck-boost DC-DC converter series enhanced with adjustable current limit option for parallel operation
TDK Corporation (TSE 6762) announces the addition of adjustable current limit models to the TDK-Lambda brand 300W rated i7C non-isolated DC-DC converter series. These buck-boost board mount…
- Low audible noise 800W and 1000W medical and industrial power supplies provide power densities of up to 27.2W/cubic inch
TDK Corporation (TSE 6762) announces the introduction of the TDK-Lambda brand CUS800M and CUS1000M AC-DC power supply series in a 6.73 x 3.35 x 1.67” (171 x…
- The next generation ZWS-C AC-DC 10-50W power supplies
Globally, the ZWS series has been powering industrial applications for many years. Manufacturers of machinery, semiconductor fabrication, and test and measurement equipment rely on the product’s conservative…
- 2” x 4” 250W medical and industrial power supply series extended
TDK Corporation (TSE:6762) announces additional output voltage models to the 250W rated TDK-Lambda brand CUS250M series of power supplies in the industry standard 2” x 4” footprint.…
- Class I & II industrial 10 to 50W power supplies released
TDK Corporation (TSE 6762) announces the introduction of the ZWS-C series of 10, 15, 30 and 50W rated industrial AC-DC power supplies. The products meet EN55011/EN55032-B conducted…
- 12V output 2040W 3-phase industrial power supply operates from 400/440/480Vac Delta and Wye inputs
TDK Corporation (TSE 6762) announces the addition of the TDK-Lambda brand TPS4000-12 power supply, further extending the existing 3kW to 4kW rated TPS series. Delivering up to…
- Aerospace test system uses rugged MIL-spec DC-DC converters
Any aircraft, civilian or military, flying in shared airspace needs to meet civil aviation safety standards. Large amounts of data are often gathered, analysed and transmitted by…
- 300W Power Sink option added to the GENESYS+™ 1.7kW and 3.4kW programmable power supplies
The PSINK option on the GENESYS+™ series is used to reduce automated testing times, by enabling fast down-programming under no-load conditions. After a test is completed, the…
