{"id":4269,"date":"2017-08-23T08:01:17","date_gmt":"2017-08-23T08:01:17","guid":{"rendered":"http:\/\/blog.uk.tdk-lambda.com\/uk\/?p=4269"},"modified":"2018-01-17T14:41:40","modified_gmt":"2018-01-17T14:41:40","slug":"what-is-power-supply-slew-rate-and-can-it-be-programmed","status":"publish","type":"post","link":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/","title":{"rendered":"What is power supply slew rate and can it be programmed?"},"content":{"rendered":"

Slew rate is defined as rate of change of voltage or current in a period of time. It is a frequently used term in operational amplifier specifications, but it also applicable when discussing programmable power supplies.<\/p>\n

\"\"<\/a>
\nFigure 1: Typical battery voltage profile for \u201ccold crank\u201d<\/p>\n

When performing repetitive production testing on say a vehicle engine management system, many manufacturers will perform full function testing at multiple input voltages to simulate varying battery conditions. For an automobile that battery range is typically 9V to 16V, but may drop down to 3V when the engine is first started in cold ambient conditions (cold-crank). Figure 1 shows a typical battery voltage profile under that condition.<\/p>\n

To exactly reproduce the cold crank characteristic in Figure 1, prior generations of programmable power supplies would have to be modified at the factory, as the response time of the supply is primarily determined by the value of the output capacitors. This can then involve making a trade-off between a faster slew rate at the expense of higher ripple voltages and currents.<\/p>\n

TDK-Lambda\u2019s new GENESYS+™ series of programmable power supplies, however, utilises DSP (Digital Signal Processing) allowing the user to individually set both the voltage and current slew rates. Separate values for both the up and down control can also be programmed. For maximum flexibility, a programming range of 0.001 to 999.9 volts or amps per milli-second can be set, in steps of 0.0001 volts or amps per milli-second.<\/p>\n

For example; Figures 2 and Figure 3 show the results of the same GENESYS+™ model programmed for different up control slew rate times.<\/p>\n

\"\"<\/a>
\nFigure 2<\/p>\n

\"\"<\/a>
\nFigure 3<\/p>\n

When testing high volume parts where a defined slew rate is not required, using a programmable power supply with a slow fixed up \/ down program response time can significantly extend device test time. This results in less parts per hour being tested, or additional test stations having to be installed; both of which can impact manufacturing costs. The ability to program the GENESYS+™ slew rates provides cost savings, as the same programmable power supply can be used to test multiple products requiring both fast and slow response times.<\/p>\n

Slew rate programming for the GENESYS+™ can be programmed by using the front panel controls or through one of the communication interfaces. USB, RS232\/485 and LAN are fitted as standard, with the option of GPIB or Anybus\u00ae interfaces. <\/p>\n

As a note, slew rate is not to be confused with the power supply\u2019s transient response characteristics.<\/p>\n

TDK-Lambda UK
\nwww.emea.lambda.tdk.com\/uk\/genesysplus<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Slew rate is defined as rate of change of voltage or current in a period of time. It is a frequently used term in operational amplifier specifications, but it also applicable when discussing programmable power supplies. Figure 1: Typical battery voltage profile for \u201ccold crank\u201d When performing repetitive production testing on say a vehicle engine […]<\/p>\n","protected":false},"author":11,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[81,1,22],"tags":[],"class_list":["post-4269","post","type-post","status-publish","format-standard","hentry","category-genesysplus","category-power-supply-basics","category-products"],"acf":[],"yoast_head":"\nWhat is power supply slew rate and can it be programmed? « TDK-Lambda UK Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"What is power supply slew rate and can it be programmed? « TDK-Lambda UK Blog\" \/>\n<meta property=\"og:description\" content=\"Slew rate is defined as rate of change of voltage or current in a period of time. It is a frequently used term in operational amplifier specifications, but it also applicable when discussing programmable power supplies. Figure 1: Typical battery voltage profile for \u201ccold crank\u201d When performing repetitive production testing on say a vehicle engine […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/\" \/>\n<meta property=\"og:site_name\" content=\"TDK-Lambda UK Blog\" \/>\n<meta property=\"article:published_time\" content=\"2017-08-23T08:01:17+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2018-01-17T14:41:40+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/blog.uk.tdk-lambda.com\/uk\/files\/2017\/07\/LA008709a-fig1-300x225.jpg\" \/>\n<meta name=\"author\" content=\"Dulcie\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Dulcie\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/\"},\"author\":{\"name\":\"Dulcie\",\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/#\\\/schema\\\/person\\\/a0eecfbb93bfb5281b703bd45b29d4eb\"},\"headline\":\"What is power supply slew rate and can it be programmed?\",\"datePublished\":\"2017-08-23T08:01:17+00:00\",\"dateModified\":\"2018-01-17T14:41:40+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/\"},\"wordCount\":427,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/files\\\/2017\\\/07\\\/LA008709a-fig1-300x225.jpg\",\"articleSection\":[\"GENESYS+\u2122\",\"Power Supply Basics\",\"Products\"],\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/\",\"url\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/\",\"name\":\"What is power supply slew rate and can it be programmed? « TDK-Lambda UK Blog\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/files\\\/2017\\\/07\\\/LA008709a-fig1-300x225.jpg\",\"datePublished\":\"2017-08-23T08:01:17+00:00\",\"dateModified\":\"2018-01-17T14:41:40+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/#\\\/schema\\\/person\\\/a0eecfbb93bfb5281b703bd45b29d4eb\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/#primaryimage\",\"url\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/files\\\/2017\\\/07\\\/LA008709a-fig1.jpg\",\"contentUrl\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/files\\\/2017\\\/07\\\/LA008709a-fig1.jpg\",\"width\":3000,\"height\":2250},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/2017\\\/08\\\/23\\\/what-is-power-supply-slew-rate-and-can-it-be-programmed\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"What is power supply slew rate and can it be programmed?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/#website\",\"url\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/\",\"name\":\"TDK-Lambda UK Blog\",\"description\":\"TDK-Lambda EMEA Power Supply News\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/#\\\/schema\\\/person\\\/a0eecfbb93bfb5281b703bd45b29d4eb\",\"name\":\"Dulcie\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/2d49e58ebc4eae40264d7743a765c3e9cefedecc1f831cd9b207933081b116ba?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/2d49e58ebc4eae40264d7743a765c3e9cefedecc1f831cd9b207933081b116ba?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/2d49e58ebc4eae40264d7743a765c3e9cefedecc1f831cd9b207933081b116ba?s=96&d=mm&r=g\",\"caption\":\"Dulcie\"},\"url\":\"https:\\\/\\\/blog.uk.tdk-lambda.com\\\/uk\\\/author\\\/dulcie\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"What is power supply slew rate and can it be programmed? « TDK-Lambda UK Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/","og_locale":"en_GB","og_type":"article","og_title":"What is power supply slew rate and can it be programmed? « TDK-Lambda UK Blog","og_description":"Slew rate is defined as rate of change of voltage or current in a period of time. It is a frequently used term in operational amplifier specifications, but it also applicable when discussing programmable power supplies. Figure 1: Typical battery voltage profile for \u201ccold crank\u201d When performing repetitive production testing on say a vehicle engine […]","og_url":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/","og_site_name":"TDK-Lambda UK Blog","article_published_time":"2017-08-23T08:01:17+00:00","article_modified_time":"2018-01-17T14:41:40+00:00","og_image":[{"url":"https:\/\/blog.uk.tdk-lambda.com\/uk\/files\/2017\/07\/LA008709a-fig1-300x225.jpg","type":"","width":"","height":""}],"author":"Dulcie","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Dulcie","Estimated reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/#article","isPartOf":{"@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/"},"author":{"name":"Dulcie","@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/#\/schema\/person\/a0eecfbb93bfb5281b703bd45b29d4eb"},"headline":"What is power supply slew rate and can it be programmed?","datePublished":"2017-08-23T08:01:17+00:00","dateModified":"2018-01-17T14:41:40+00:00","mainEntityOfPage":{"@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/"},"wordCount":427,"commentCount":0,"image":{"@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/#primaryimage"},"thumbnailUrl":"https:\/\/blog.uk.tdk-lambda.com\/uk\/files\/2017\/07\/LA008709a-fig1-300x225.jpg","articleSection":["GENESYS+\u2122","Power Supply Basics","Products"],"inLanguage":"en-GB","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/","url":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/","name":"What is power supply slew rate and can it be programmed? « TDK-Lambda UK Blog","isPartOf":{"@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/#website"},"primaryImageOfPage":{"@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/#primaryimage"},"image":{"@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/#primaryimage"},"thumbnailUrl":"https:\/\/blog.uk.tdk-lambda.com\/uk\/files\/2017\/07\/LA008709a-fig1-300x225.jpg","datePublished":"2017-08-23T08:01:17+00:00","dateModified":"2018-01-17T14:41:40+00:00","author":{"@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/#\/schema\/person\/a0eecfbb93bfb5281b703bd45b29d4eb"},"breadcrumb":{"@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/"]}]},{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/#primaryimage","url":"https:\/\/blog.uk.tdk-lambda.com\/uk\/files\/2017\/07\/LA008709a-fig1.jpg","contentUrl":"https:\/\/blog.uk.tdk-lambda.com\/uk\/files\/2017\/07\/LA008709a-fig1.jpg","width":3000,"height":2250},{"@type":"BreadcrumbList","@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/2017\/08\/23\/what-is-power-supply-slew-rate-and-can-it-be-programmed\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/blog.uk.tdk-lambda.com\/uk\/"},{"@type":"ListItem","position":2,"name":"What is power supply slew rate and can it be programmed?"}]},{"@type":"WebSite","@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/#website","url":"https:\/\/blog.uk.tdk-lambda.com\/uk\/","name":"TDK-Lambda UK Blog","description":"TDK-Lambda EMEA Power Supply News","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/blog.uk.tdk-lambda.com\/uk\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Person","@id":"https:\/\/blog.uk.tdk-lambda.com\/uk\/#\/schema\/person\/a0eecfbb93bfb5281b703bd45b29d4eb","name":"Dulcie","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/secure.gravatar.com\/avatar\/2d49e58ebc4eae40264d7743a765c3e9cefedecc1f831cd9b207933081b116ba?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/2d49e58ebc4eae40264d7743a765c3e9cefedecc1f831cd9b207933081b116ba?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/2d49e58ebc4eae40264d7743a765c3e9cefedecc1f831cd9b207933081b116ba?s=96&d=mm&r=g","caption":"Dulcie"},"url":"https:\/\/blog.uk.tdk-lambda.com\/uk\/author\/dulcie\/"}]}},"_links":{"self":[{"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/posts\/4269","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/comments?post=4269"}],"version-history":[{"count":0,"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/posts\/4269\/revisions"}],"wp:attachment":[{"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/media?parent=4269"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/categories?post=4269"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blog.uk.tdk-lambda.com\/uk\/wp-json\/wp\/v2\/tags?post=4269"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}